Bauteil Nr. von Tecmark oder einem Konkurrenzprodukt eingeben um ein passendes Tecmark Ersatzteil zu finden:

Tecmark Corporation

7745 Metric Drive

Mentor, Ohio 44060

(440) 205-7600

(440) 205-7601 (fax)

info@tecmarkcorp.com ISO 9001 certified
Tecmark Katalog

Zum Runterladen bitte Ihre Region wählen:

Download the
ISO9001:2008
Certificate of Conformance

Tecmark unterstützt:
  • Diese Seite drucken
  • Lesezeichen
  • Technische Tips
Home > Spa-Kontrollen > Series Spa-Steuerungen

Spa-Kontrollen - Series Spa-Steuerungen

Series CSC Schrittschalter

Spa-Steuerungen Spa Side Control

Spa-Steuerungens® are complete spa-side control packages designed for durability and user convenience in both new installations and replacement applications. They are available with two, three and four transmitter button configurations, and are equipped with a remote sensing thermostat, power cord, equipment status indicating lights and optional digital temperature readout.


The Spa-Steuerungens® utilize an electronic thermostat designed, developed and manufactured by Tecmark® in our Mentor, Ohio facility. These units feature a thermistor/bulb assembly for remote temperature sensing. All thermostats are calibrated to open on temperature rise at the UL/CSA maximum allowable set point with the shaft at the high stop position and are intended for pilot duty control of heater contactors. Standard thermistor cable length is 60" (1.5m) with a 5/16" (8mm) OD bulb for thermowell installation.


Tecmark® Spa-Steuerungen® technology incorporates a unique, tactile thermostat adjustment knob with each notch equal to approximately 1° F (.56°C) temperature The Spa-Steuerungens® feature high volume, miniature air transmitters for operation single function or four function switching controls. The faceplate design allows serviceability of individual transmitters without having to replace the entire unit. design conserves space and it is easily retrofittable to existing applications.


Typical Applications

The Spa-Steuerungen® is primarily used at the spa-side to regulate the water temperature, and to control, via the air transmitter buttons, a variety of electrical devices including motors, lights, pumps, air blowers, and other associated equipment.


Basic Construction

  • One piece faceplate/housing construction utilizes durable thermoplastic materials
  • Tactile thermostat adjustment knob
  • Multicolor LED equipment status indicators
  • Factory installed double-sided foam mounting gasket
  • Electrical connections via 18/5 SJTW-SJTW-A water resistant cord with 5-pin plug
  • Pressure connections accept 1/8" (3mm) or 1/16" (1.5mm) I.D. tubing
  • 60" (1.5m) thermistor cable with 5/16" (8mm) O.D. bulb
  • Allows serviceability of transmitters without replacing the entire unit
  • Conforms to UL and CSA standards under UL file E110332; low 12 volt safety control voltage acceptable worldwide (electronics comply with CE regulation)

Available Features

  • 12, 120 OR 240 VAC, 50/60 Hz (factory set)
  • Digital display factory set to display water temperature in degrees F or degrees C. Temperature will flash intermittently at temperatures above 109° F (43° C)
  • Two, three and four air transmitter configurations available with faceplate size equal to the previous two-button faceplate
  • Optional retrofit plate available for existing three and four button installations.
  • Optional thermistor cable lengths
  • Power cords in 6' (1.8 m), 10' (3.0 m) and 25" (7.6 m) lengths
  • Units may be individually carton packaged or bulk packed
  • Custom labeling, produced from your own camera-ready artwork or created with the help of Tecmark's design staff, is available to satisfy specific needs

Ratings and Specifications

  • Input voltage: 12, 120 or 240 VAC, 50/60 Hz (factory set)
  • Field-tested critical components specifically selected to operate reliably in temperature extremes of 32° F (0° C) -140° F (60° C)
  • 100,000+ cycle life under full mechanical, electrical and thermal loads.
  • Electrical rating allows pilot duty control of heater contactors
  • Thermostat contacts are designed to open on temperature rise at the UL/CSA maximum allowable setpoint with the adjustment shaft rotated to the full clockwise position
  • Switching differential: Approximately 1° F (.56° C)
  • 100,000+ cycle life under full mechanical, electrical and thermal loads

Design Flexibility

Tecmark's manufacturing philosophy is unique. In an effort to provide you with a product that is most suited to your application, the Spa-Steuerungen® models incorporate numerous interchangeable components for the ultimate in design flexibility. This means a product tailored to your needs without the high price and long lead times associated with custom manufacturing. If you have a need and don't see the features you require, please ask us!


Download the PDF for this product >>>
Send RFQ for this Product >>>