Escolha um idioma:  

Insira o número de um peça da concorrência e encontre o número da Tecmark para substituí-la

Tecmark Corporation

7745 Metric Drive

Mentor, Ohio 44060

(440) 205-7600

(440) 205-7601 (fax)

info@tecmarkcorp.com ISO 9001 certified
Catálogo Tecmark

Escolha uma região para fazer o download do catálogo:

Download the
Certificate of Conformance

Tecmark sponsors
  • Imprimir esta página
  • Adicionar a favoritos
  • Dicas técnicas
Início > Sensores de nível > Series EP1226

Sensores de nível - Series EP1226

Series EP1226 Sensor de Nível

Series EP1226 Sensor de Nível

The EP1226 solid state, non-contact level sensor monitors liquid level in a variety of applications. Encapsulated in a low profile enclosure, the electronic mass sensor is configured to work either in conjunction with the Tecmark® EP1217 / EP1227 timers or as a stand-alone device. Designed for use with non-metallic containers. The sensor mounts via double sided adhesive backed foam tape to the "dry" side of the container.

Use with EP1217 / EP1227 timers

The level sensor interfaces with the motor timer, via an optional three-pin header located on the timer to facilitate easy electrical connection. The level sensor will inhibit actuation of the timer's load relay until a pre-selected fluid level has been attained. If fluid level drops below the sensor actuation point during normal operation of the timer, the load relay will immediately de-energize to prohibit potential equipment or liquid spray damage. The timer will remain de-energized until the proper fluid level is restored and the PCB mounted air switch is actuated again.

Stand Alone System

Powering a relay coil the sensor provides a logic signal to energize the relay when sufficient liquid level is sensed, or de-energize the relay if liquid level is insufficient.

Typical Applications

Series EP1226 Electronic Liquid Sensores de nível monitor level in a variety of applications including whirlpool bathtubs residential and commercial applications, spas, swimming pools, tanks and wells.

Basic Construction

  • Sealed in a low profile enclosure
  • Conformal coated and open circuit boards available
  • Wire leads stripped and retained ends (red, black and green)
  • UL approved, and CSA and CE certified

Available Features

  • May be used with Tecmark's EP1217 / EP1227 Motor Mount Timer via optional three-pin header on timer
  • Individual model configured for use with relay
  • Easy mounting with double sided adhesive backed foam tape
  • Can be field calibrated to compensate for variance in container material thickness

Ratings and Specifications

  • Power input: EP1226-1 powered by EP1217 / EP1227 (timer), EP1226-2 power input 9 to 30 VDC, 200 mA min
  • Output: 9 to 30 VDC (nominal 100 Ma max @ 12 VDC)
  • Operating temperature 0° to 158°F (-17° to 70°C)

Design Flexibility

Tecmark's manufacturing philosophy is unique. In an effort to provide you with a product that is most suited to your application, the Series EP1226 Electronic Sensores de nível incorporate many interchangeable components for the ultimate in design flexibility. This means a product tailored to your needs without the high price and long lead times associated with custom manufacturing. If you have a need and don't see the features you require, please ask us!

Download the PDF for this product >>>
Send RFQ for this Product >>>